BOND-N-FLEX, Easily Repairs Vinyl & Leather. Do you have a sofa or auto seat that has torn, been scratched by your cat, is peeling, etc? BOND-N-FLEX is here to save the day. Don't throw out your torn leather & vinyl before you try this!
KIT IS $17 SAVINGS FROM BUYING INDIVIDUAL ITEMS!
Available in 14 colors!
1-8oz Container of BOND-N-FLEX
1-16oz Finish All Paint (in your choice of color)
1-Spreader to apply BOND-N-FLEX
1-Chip Brush (to get paint into crevices)
1- Pair of gloves
1- Sanding block
1- 2pk True Applicator sponges (to apply paint)
This size will typically do a sofa with 2 good size repairs and not a drastic color change. If doing a larger piece or making a drastic color change, you may need an additional pint of Finish All Paint.
* Tears & Holes
#1 Prep the surface with the non-acetone finger nail polish remover. Pay special attention to the areas where skin/hair would touch such as headrest, footrest, armrest. Remove any loose or peeling material.
#2-basic application of Bond-N-Flex put on a smooth layer to fill gaps.
#3 Allow BNF to dry for 24 hours.
#4 Sand if necessary with a medium grit sanding block.
#5-Paint with Finish All Paint #6 repeat steps 2-5 if necessary to achieve desired coverage and results.
Tips: Do not apply in freezing or extremely hot temperatures. Best application is in temperatures of 65-85 deg F.
Open Time/Able to reposition: 15 mins Dry Time: 24 hours Full Cure Time: 14 days
Handling-Protect surrounding area and clothes from spills and splatters. Protect your hands with gloves.
Clean up-Clean with soap & water. Do not allow product to dry on tools.
Storage-Keep lid on at all times when not in use. Store at room temperature between 65-85 degrees for best shelf life. Protect from freezing temperatures.